nutsM8 4pcs
rack plate
2pcs
filament rack
1. Take 1 piece of material rack plate, 1 outer hexagon screw and 2
nut M8, assemble the lock as shown.
2. Take 2 screws of PM4*8, respectively go through the material
rack plate, and screw on the on-board nut M4, as shown in the
figure.Repeat 1, 2 steps to assemble the other.
3. Fix the material rack assembly into the aluminum profile groove
with boat nut, and lock the 2 screws PM4*12, as shown in the
figure.(hang the material plate on the screw rod)
screwPM4*12 4pcs
Step 12: assemble the filament rack
Assembly material specification and quantity:
hex screwM8*100 2pcs
mainframe 1pcs
boat nutsM4 4pcs
Summary of Contents for X5S 2E
Page 16: ...Wiring diagram of main board ...
