Step 7 Assemble Y axis Motor
Parts:
Limit switch – 1pcs
42 stepper motor – 1pcs
GT2-16 Pulley (with grub screw in it)– 1pcs
Y motor mount (Acrylic) – 1pcs
M3-6mm screw – 4pcs
M4-8mm screw – 2pcs
M4 T-Nut - 2pcs
M2-10mm screw – 2pcs
M2 Nut – 2pcs
Secure the limit switch to motor mount using
2pcs M2-10mm screws and nuts. Then secure
the motor mount to the back of the Y slide rail
using 2pcs M4-8mm screws and T-nuts.
Insert the GT2-16 pulley to the motor shaft,
tighten the grub screw in the pulley. Next Secure
the stepper motor to the motor mount using
4pcs M3-6mm screws.
Summary of Contents for X3A
Page 1: ......
