Step 18 Assemble X axis Belt Pulley
Parts:
Belt pulley – 1pcs
X Pulley mount (acrylic) – 1pcs
M5-25mm screw – 1pcs
M5 Nut – 2pcs
M6 washer – 2pcs
M5 washer – 2pcs
M4-8mm screw – 2pcs
M4 T-Nut - 2pcs
Take 1pcs M5-25mm screw and insert the Pulley
mount, secure it with M5 nut , then insert the
washers and belt pulley , secure them using M5
nut. (same as step 6)
Secure the X belt pulley assembly on the right of
the X slide rail using 2pcs M4-8mm screws and
nuts.
Tighten screws gently to avoid damaging the
acrylic.
Summary of Contents for X3A
Page 1: ......