Step 10 Assemble Z Carriage_Right
Parts:
42 Motor bracket – 1pcs
Sliding plate(acrylic) – 2pcs
Brass nut – 1pcs
Brass nut holder_R – 1pcs
Plastic pillar – 6pcs
Wheel – 3pcs
M5-45mm screw – 3pcs
M4-12mm screw – 6pcs
M3-16mm screw – 2pcs
M5 Nut – 3pcs
M4 Nut – 6pcs
M3 Nut – 2pcs
Put the brass nut into the holder_R using 2pcs
M3-16mm screws and nuts, then secure the
holder with one sliding plate using 2pcs M4-
12mm screws and nuts.
Assemble the motor bracket and one sliding plate
using 4pcs M4-12mm screws and nuts.
Insert 3pcs M5-45mm screws to the sliding plate,
Put the wheels into M5-45mm screws, using
plastic pillars between wheel and acrylic, secure
them using M5 nuts.
Please pay attention to the installing direction.
Summary of Contents for X3A
Page 1: ......
