Installation Guide ROQSTAR
Document no. 130- 106.44 11/2017 ENG
Page 7 of 16
3.
Installation
WARNING!
Never perform wiring electrical connections if they are under voltage!
Do not perform any assembly work on the device when it is under voltage!
3.1.
Mounting
Perform the following steps for mounting the device:
► Make sure that all electrical connectors are volt-free.
► Make sure that the device is disconnected from all connections.
► Prepare the drill holes at the installation site.
► Mount the device on a flat surface with four M4 screws.
► Ground the device via the provided ground connection.
Make sure that the ground connection is always tightened securely. Use
toothed lock washers with internal teeth to produce ideal contact.