background image

 

Installation Guide ROQSTAR 
Document no. 130- 106.44  11/2017 ENG 

 

Page 5 of 16

 

1.3. 

Qualified Personnel 

The  user  must  ensure  that  only  qualified  personnel  will  work  with  the  device.  The  product/system 
described  in  this  documentation  may  be  operated  only  by  personnel  qualified  for  the  specific  task  in 
accordance  with the relevant documentation, in particular  its  warning  notices and safety  instructions. 
Qualified personnel are those who, based on their training and experience, are capable of identifying 
risks and avoiding potential hazards when working with these products/systems. 
 

1.4. 

Intended use 

Proper  transport,  storage,  installation,  assembly,  commissioning,  operation  and  maintenance  are 
required to ensure that TRONTEQ products operate safely and without any problems. The permissible 
ambient  conditions  must  be  complied  with.  The  information  in  the  relevant  documentation  must  be 
observed. 

1.5. 

Liability Limitation 

All  information  and  instructions  in  this  operating  instruction  has  been  compiled  in  accordance  with 
current  standards  and  regulations,  state  of  the  art  as  well  as  the  knowledge  and  experience  of  the 
applications in the field. In the following cases the manufacturer is not liable for damages: 
 

►  Disregard of the operating instructions in this manual. 

►  Improper use.  

►  Employment of non-qualified personnel. 

►  Unauthorized technical modification or reconstruction. 

►  Use of other connectors as delivered. 

 
The general terms and conditions are valid as well as the delivery terms of the manufacturer and the 
legal regulations which were taken when the contract was concluded. 
 
We  have  reviewed  the  contents  of  this  publication  to  ensure  consistency  with  the  hardware  and 
software  described.  Since  variance  cannot  be  precluded  entirely,  we  cannot  guarantee  full 
consistency.  However,  the  information  in  this  publication  is  reviewed  regularly  and  any  necessary 
corrections are included in subsequent editions. 

1.6. 

Disposal 

The device should be disposed of after use in accordance with the current disposal regulations as 
electronic waste. 
 

 

Summary of Contents for ROQSTAR

















Reviews: