Tronic PMG Quadpad User Manual Download

Page: 16 / 73

PMG Quadpad Instructions Manual

3. Turn the PMG Quadpad on using the power switch or begin recharging

using the AC Adapter cord.

Removing/Replacing the Battery:

2. Push the slide while gently pushing the battery away from the battery

bay. The battery will release from the PMG Quadpad and allow you to

remove it.

3. Carefully lift the battery out.

Caring for the Battery

•

Do not heat, tamper or place the battery in water or near a fire.

•

Do not subject the battery to unusual forces such as hitting it, stepping on it

or dropping it.

•

Do not attempt to open or service the battery pack.

•

Only replace the battery with the same model or one of compatible design.

The External Battery Charger

The external battery charger is an optional peripheral of PMG Quadpad for

battery recharging. The user is able to plug the DC power cord into the DC

jack on the charger, then plug the AC power cord into a grounded electrical

outlet.

Contact an authorized dealer for more information.

Summary of Contents for PMG Quadpad










































































Search results

Summary of Contents for PMG Quadpad

Reviews:

Related manuals for PMG Quadpad

Brands by name

Popular brands

Tronic PMG Quadpad, User Manual

Search results

Summary of Contents for PMG Quadpad

Reviews:

Related manuals for PMG Quadpad

Brands by name

Popular brands