USER MANUAL TST40G, V15.01
page
|
16
Technical changes, misprints and errors are reserved.
4. Operation instructions
4.1.
Precautions
- Check all joints of the oil hoses, only when there is no leakage you can
start to work with the lift.
- The lift must not be used if its safety devices has any malfunctions!
- The machine must not raise or lower an automobile, if its center of gravity
is not positioned midways between the lifting arms. Otherwise, the
manufacturer will not bear any responsibility for any consequences
resulted thereby!
- Always keep the lift and the lifting area clean and free of tools, parts,
debris etc.
- When the lift has raised the vehicle to the desired height, switch off the
power, to prevent any mal-operation done by unauthorized people.
- Make sure that the safety lock of the lift is properly locked, before you start
to work under the vehicle!
- Do not allow anyone to stay in the lifting area during raising and lowering
cycles.
- Closely watch the vehicle and the lift during raising and lowering cycles.
- Only use the lift for its intended purpose.
- Climbing up the raised lift or vehicle is prohibited!
- Comply with the applicable accident prevention regulations.
- Do not overload the lift. The rated load capacity is indicated on the lifts
nameplate.
- Only use the vehicle manufacturer´s recommended lifting points!
- Use caution when removing or installing heavy components
(center-of-gravity displacement)!
