USER MANUAL TST40G, V15.01
page
|
15
Technical changes, misprints and errors are reserved.
Step 14:
- Fill the oil tank with hydraulic oil
- The volume of the oil tank is approx. 10L, to ensure the lift can work
normally, the amount of oil in the tank should at least reach 80% of its total
volume
Attention: For environment protection, dispose the any used oil in a
proper way, according to your local regulations!
Step 15:
- Trial run:
o
Refer to the operation instructions in advance and keep in mind that
no vehicle is on the lift in the process of a trial run
o
Check and ensure that all the connections are in good condition
o
NO VEHICLE ON THE LIFT DURING TRIAL RUNNING!
3.4.
Items to be checked after installation
Check items
YES
NO
1
Are the posts vertical to the floor?
2
Are the two posts parallel to each other?
3
Is the oil hose well connected?
4
Is the steel cable well connected?
5
Are all lifting arms fixed tight?
6
Are electrical connections right?
7
Are the rest joints firmly tightened?
8
Are all moving parts lubricated?
(Chapter 6 maintenance)
