8
ASSEMBLY STEPS
1. PREPARATION
• Before assembling make sure that you will have enough space around the item.
• Use the supplied parts and hardware for the assembly.
• Before assembling please check whether all the required parts have been supplied as per the parts list.
STEP 1:
Fasten Back Rest (2) to Main Frame (1) with 4 Back
Rest Mounting Hardware (3).
STEP 2:
Connect Support Leg (4) to Main Frame (1) with 1
3/8’’ x 2.-1/4’’ Hex Bolt (8), 3/8’’x 19 mm Washer (6)
and Knob (7).
STEP 3:
Slide Incline Stabilizer Bar (5) into Support Leg (4).
Fasten with Adjustment Crossbar (10) at desired
height and tighten with 3/8”x 19 mm Washer (6) and
Knob (7).
STEP 4:
Slide Foam Roll (11) onto Adjustment Crossbar (10).
STEP 5:
Slide Upper Crossbar (9) through Support Leg (4).
STEP 6:
Slide 1 Round Cap (12) on Upper Crossbar (6) one on
either side of Support Leg (4).
STEP 7:
Attach Foam Roll (11) on Upper Crossbar (9) and
Adjustment Crossbar (10).
1475-5
3. ASSEMBLY STEP
STEP 01
Fasten Back Rest (2) to Main Frame (1) with four Back Rest Mounting Hardware (3).
STEP 02
Connect Support Leg (4) to Main Frame (1) with one 3/8” x 2-1/4” Hex Bolt (8), 3/8”x19mm Washer (6) and
Knob (7).
STEP 03
Slide Incline Stabilizer Bar (5) into Support Leg (4). Fasten with Adjustment Crossbar (10) at desired height
and tighten with 3/8”x19mm Washer (6) and Knob (7).
STEP 04
Slide Foam Roll (11) onto Adjustment Crossbar (10).
STEP 05
Slide Upper Crossbar (9) through Support Leg (4).
STEP 06
Slide 1” Round Cap (12) on Upper Crossbar (6) one on either side of Support Leg (4).
STEP 07
Attach Foam Roll (11) on Upper Crossbar (9) and Adjustment Crossbar (10).
