Trojan RECUMBENT 300, Care Instructions And Assembly Manual

Page: 8 / 20

10163-8
4. ASSEMBLY STEPS
Instructions for assembly
• Unpack the carton and using the parts list check that all parts are accounted for.
• Do not dispose of the packaging material until assembly is completed.
• An Allen Wrench is provided for use in assembly.
Caution
: Ensure that cables are not damaged
during assembly or when tightening screws
STEP 1
• Attach the Rear Stabilizer (15) onto the Rear
Frame (19) using 2 Carriage Bolts (39), 2 Arch
Washers (30) and 2 Cap Nuts (36).
• Attach the Front Stabilizer (21) onto the Main
Frame (1) using 2 Carriage Bolts (38), 2 Arch
Washers (30) and 2 Cap Nuts (36).
STEP 2
• Thread the Pedals (13 & 14) onto the Cranks (9) as
shown.
• Loosen the Adjustment Knob (47) on the Front
Frame (19) and slide the Rear Frame (19)
backwards to the desired length. Secure the Rear
Frame (19) by tightening the Adjustment Knob (47).
STEP 3
• Connect the Pulse Wires (64) in the Handle Bars
(61) to the Pulse Wires (41) on the Rear Frame
(19).
• Attach the Handle Bars (61) onto the Rear Frame
(19) using 2 Carriage Bolts (38), 2 Arch Washers
(30) and 2 Nylock Nuts (31).