Trojan ELLIPTI-PRO 300, Care Instructions And Assembly Manual

Page: 8 / 24

1570-8
ASSEMBLY STEPS
STEP 04
s0LUGTHEMIDDLECOMPUTERWIRE ANDLOWERSENSORPULSEWIRE
(31) to the back hole of the computer (12)
s3LIDETHECOMPUTER ONTOTHEPLATEONFRONTPOST ANDUSE
four M5x15 mm screws(36) to fasten
STEP 05
s)NSERTLEFTRIGHTUPPERHANDLEBAR TO
left & right lower hand rail(5,6) with
round head bolts M6x 15 MM (24) and flat
washers 13 mm (25)
s!TTACH$OMED.UT-CAPS TOTHE
position as drawing shown
s!TTACHTHE"OTTLE(OLDER TOFRONTPOST
with 2 screws (34)
s0LUGTHEADAPTOR INTOTHEMAINFRAME
Recheck
all bolts and nuts are
tightened securely
before using the machine
CAUTION:
Ensure that cables are not damaged
during assembly or when tightening screws.