background image

3

EGYM

IMPORTANT SAFETY INSTRUCTIONS 

  

It is the sole responsibility of the purchaser of Trojan products to read the owner’s manual, warning labels and  
instruct all individuals, on proper usage of the equipment. Understanding each and every warning to the fullest  
is important. If any of these instructions or warnings are unclear please contact Trojan Customer Services on  

0861 TROJAN (0861 876526)

, within the Republic of South Africa. Customers residing outside South Africa can 

contact us on +27 10 206 4405.

The equipment is only intended for home use and is not intended for commercial, institutional and/or studio facilities 
use.

Contact Trojan with any questions regarding this classification. It is recommended that all users of Trojan be informed 

of the following information prior to use.

  HEALTH WARNING

• 

Before starting any exercise or conditioning program you should consult with your personal physician to see if 
you require a complete physical exam. This is especially important if you are inactive, pregnant or suffer from any 
illness.

• 

If at any time during exercise you feel faint, dizzy or experience pain, stop exercising immediately and consult 
your physician.

• 

To avoid muscular pain and strain, begin each workout by stretching and warming up and end each session by 
cooling down and stretching.

  INSTALLATION

Trojan recommends that all equipment:
• 

Be secured to or set up on a solid, level surface to stabilise and eliminate rocking or tipping over during 
training.

• 

Be set up inside your home away from moisture and dust (the equipment is not designed for outdoor use).

• 

Be set up with sufficient ventilation to ensure proper operation.

• 

Be set up with sufficient space around the equipment so that all exercises can be completed safely. It is 

recommended that there should be at least 1 m of space around the equipment where access is required to 
exercise.

  PROPER USAGE

• 

Do not use the equipment in any way other than as designed or intended by the manufacturer. It is imperative 
that Trojan equipment is used properly to avoid injury.

• 

Injuries may result from exercising improperly or excessively.

• 

Your Trojan equipment should only be used by 1 person at a time.

• 

Be careful to maintain your balance while using, mounting, dismounting or assembling your Trojan equipment to 
avoid injury.

• 

Servicing other than the procedures in this manual should be performed by an authorised service representative 
only.

  ACCESS CONTROL

• 

Trojan recommends that all fitness equipment be used in a supervised area. It is recommended that the 

equipment be located in an access controlled area. Control is the responsibility of the owner. Keep children away 
from all equipment.

• 

Parents or other supervising adults must provide close supervision of children if the equipment is used in the 
presence of children.

#19M09T004 Elite Gym 2.0 UM A4.indd   3

2019/09/17   3:20 PM

Summary of Contents for ELITE GYM 2.0









































Reviews: