25
EGYM
STEP 12
STEP 12:
1. Attach the Plugs (50 x 50) (64) to the ends of the Press Arm (17).
2. Attach the Plugs (25 x 50) (62) to the ends on the Press Arm (17).
3. Slide the Comfort Grip (75) to the one end of the Press Arm (17).
4. Slide the Foam (Ø23 x 300) (84) on to both Handles found on the Press Arm (17).
5. Attach the Plugs (Ø25 x 1.5) (59) to both ends of both handles on the Press Arm (17).
6. Line up the holes of the Press Arm (17) and the Adjustment Frame (14).
7. Insert the Long Shaft (23) through the Press Arm (17) and the Adjustment Frame (14).
8. Attach the Press Arm (17) to the Adjustment Frame (14) using 2 Hex Bolts (M10 x 16) (89) and 2 Big
Washers (Ø10) (106).
9. The required angle of the Press Arm can be adjusted by screwing the Pop-Pin (35) into the required position on
the Press Arm (17) and the Adjustment Frame (14).
ASSEMBLY STEPS
ASSEMBLY STEPS
#19M09T004 Elite Gym 2.0 UM A4.indd 25
2019/09/17 3:20 PM
