17
EGYM
ASSEMBLY STEPS
STEP 4
STEP 4:
1. Attach the Plug (50 x 70) (65) to the end of the Top Beam (6).
2. Attach the Top Beam (6) to the Main Upright (3) using 2 Hex Bolts (M10 x 75) (94), 4 Washers (Ø10) (108) and
2 Nylon Lock Nuts (M10) (101).
3. Attach the Top Beam (6) to the Rear Upright (2) using 2 Hex Bolts (M10 x 75) (94), 4 Washers (Ø10) (108) and
2 Nylon Lock Nuts (M10) (101).
4. Attach the Plug (50 x 50) to both ends of the Pec Top Beam (21).
5. Line up the holes in the Pec Top Beam (21) and the Top Cover Support (113) to the Guide Rods (7).
6. Once lined up attach the Pec Top Beam (21) and the Top Cover Support (113) to the Guide Rods (7) using 2 Hex
Bolts (M10 x 25) (90), 4 Washers (Ø10) (108) and 2 Nylon Lock Nuts (M10) (101).
7. Then attach the Tope Beam (6) to the Pec Top Beam (21) using 2 Hex Bolts (M10 x 70) (93), 4 Washers (Ø10) (108)
and 2 Nylon Lock Nuts (M10) (101).
#19M09T004 Elite Gym 2.0 UM A4.indd 17
2019/09/17 3:20 PM
