AWC708S Motion Control User Manual
WWW.SZTROCEN.COM
39
Table5-1-1 Set Document Property Instruction
Name
Instruction
Repeat Count
Machine repeat working times.
Repeat Delay (s)
The interval between the initial file being finished and the next
one of the same.
X Count
The number of graphics s processed by machine in the X
direction.
Y Count
The number of graphics s processed by machine in the Y
direction.
X Size (mm)
The size of graphics in X direction.
Y Size (mm)
The size of graphics in Y direction.
5.1.2 Layer Params Settings
On the
Document Params Settings
page, move cursor to
【
Layer Params
Settings
】
and press
【
Enter
】
. On the
Layer Params Settings
page, press
【↑】
【↓】
【←】
【→】
to move cursor, press
【
Z
↑】
【
Z
↓】
to modify
parameters, press
【
Enter
】
to save settings.
During cutting current layer, if the cutting lines are uneven (different
cutting depth), the maximum and minimum power of the laser head shall
be adjusted to ensure the best cutting effect. If the maximum and
minimum power is set too high, the cutting material may be damaged. If
