6
Hardware Installation
Installing the DSL Modem
1. Shut down your PC and unplug it from the power source.
2. Remove the cover of the system chassis.
3. Insert the adapter into any available PCI bus slot.
4. Press the adapter firmly into the slot to ensure that it is properly seated.
Do not jam the adapter in the slot. If you have to struggle to get it in there,
please make sure nothing is getting in its way.
5. Put back the chassis cover and apply power to the machine.
6. Turn on your PC.
If the adapter fails any power-on self tests, contact DSL modem supplier
customer service.
Adapter LEDs
Each adapter is equipped with an LED that indicates proper cable connection.
This LED is illuminated when the modem is connected to the power supply and
the DSL service provider. The LED is located on the metal plate at the back of
the card
Summary of Contents for TZ6100i
