TRIVIEW TSM-1200, User Manual

Page: 9 / 12

8. Never fill the mixing jug with boiling fluids, you could allow
these to cool down to a room temperature. Otherwise, the
appliance could overheat and the glass of the mixing jug
could crack.
9. When you use the jug operate ice, you could select nine ices
each time and the every ice size is 40MM * 40MM * 20MM.
‹
MEAT GRINDER
(ACCORDING TO MODEL D)
(See figure D).
Assembling and fitting the attachment.
1. Take the body (Cutter housing 22) by the feed tube with the largest
opening upwards.
2. Insert the
worm shaft 16
(drive pins first ) in the
cutter housing
22 .
Fit the
cutter blade 17 on the shaft with the cutting edges
upwards.
3. Place the selected hole-plate over the blades ensuring that the
two lugs fit in the two cut-outs in the body (see the figure D).
4. Screw ring (19) the cap nut fully home on the body.
5. Check the assembly .the shaft should have no play nor be able
to turn on itself.
6. Play the multifunction head in the horizontal position
(a click
should be heard ).
7. Offer up the assembled mincer attachment, titled towards you, to the
outlet and engage it fully .return the feed tube to a vertical position by
turning to the rear until it stops.
8. Place the removable tray on the feed tube.
Caution:
1). When you dissembled the body (Cutter housing 22), you must press
the button (Release button for Cutter housing, see the arrow of
figure D).
2). Insert the pieces of meat in the feed tube piece by piece using the