TRIVIEW TSM-1200, User Manual

Page: 8 / 12

and place the ingredients in it ,weighting them as indicated under the
weighing function (see figure B).
3. Position the cover on the head with the filling opening at the front of the
appliance (see figure B).
4. Fit the desired accessory(11,12,13) in the power outlet ,pushing the shaft
of the accessory home and turn it a quarter turn towards you to lock it in
position(see figure B).
5. Lower the multifunction head of the appliance to horizontal position and
press button again (a click should be heard ).
6. During preparation, you can add ingredients through the opening the
cover.
7. To stop the appliance, turn the knob (1) back to 0.
‹ HOMOGENISING /MIXING/BLENDING
(See figure C).
Depending on the nature of the ingredients, the blender can be used
to prepare up to 1.25L of mixture.
Assembling and fitting the attachment.
1. Assemble the blade assembly to the seal and lock it with a quarter turn
clockwise into the bottom of the jug (the jug must be upright).
2. Lower the multifunction heard of the appliance (10) to a horizontal
position and press button (2) again (a click should be heard).
3. Press button (9) to open the cover (3).
4. Ensure that the appliance is at a standstill before latching on the
assembled blender.
5. Fit the assembled blender and lock it in position by turning it
anticlockwise.
6. Place the ingredients in the blender jug, weighing them as indicated
under the weighing function and then fit the cover with the measuring
plug.
Caution:
7.
Do not run the blender empty for more than 1 minute.