46
Bluetooth
Enter Pin Screen
The display will either show DEVICE 2
PAIRED if pairing was successful, or PAIRING
FAILED if pairing was unsuccessful.
Device Paired
If pairing fails, check that any PIN number
used is correct, the device is still in range, and
that the device is not requesting any
confirmation from you before it allows
connection to the motorcycle.
Un-pairing
Note:
•
Un-pairing is similar for mobile
phones and headsets. The
following procedure describes
un-pairing a typical mobile phone
stored as DEVICE 2.
To access the
BLUETOOTH
menu;
1.
With the motorcycle stationary, press and
hold the MODE/MENU button on the
audio switch unit until RADIO
SETTINGS is highlighted in the display
screen.
2.
Press and release the SCROLL button
until
BLUETOOTH
is highlighted. Press
the SELECT button to enter the menu
item.
Bluetooth
Setup Screen
Press the SCROLL button up or down and
select DEVICE 2 and press the SELECT
button.
If no device is paired the display will show
DEVICE 2 - PAIR.
To pair a device see page
44
.
UNPAIR ALL
ENTER PIN
DEVICE 2
HEADSET 1
UNPAIR ALL
PAIRED
10:08
N
22°C
SOURCE SETUP
EXIT
BLUETOOTH
AUDIO SETUP
AUDIO SETTINGS
