45
Bluetooth
Bluetooth
Setup Screen
Press the SCROLL button up or down and
select DEVICE 2 and press the SELECT
button.
If a phone is already paired as DEVICE 2 the
display will show DEVICE 2 - UNPAIR.
To un-pair a device, see page
46
.
If no phone is paired the display will show
DEVICE 2 - PAIR.
Press the SCROLL button up or down to
select PAIR or EXIT and press SELECT.
Device Pairing
EXIT will return to the previous
BLUETOOTH
SETUP screen.
Selecting PAIR will start the pairing process;
the audio unit will begin searching for devices
in range.
Searching In Progress
If no device is found the display will show
DEVICE 2 - NO DEVICE. Check that the
device is turned on, in range (within
10 metres),
Bluetooth
is turned on, and the
device is discoverable/visible.
Once the device is found its name will be
shown in the display.
Device Found
If more than one device is found press the
SCROLL button up or down to select the
required device and press SELECT.
The audio system will begin pairing with the
device. Depending on the device, you may
be required to accept the connection to the
motorcycle (the motorcycle device name will
be TROPHY SE), or the device may accept
the connection automatically. Refer to the
device manufacturer’s instructions for details.
If the display screen shows ENTER PIN, enter
the correct PIN number for that device. Press
the SCROLL button up or down to select
each digit in turn and press the SELECT
button to enter that number.
10:08
N
22°C
SOURCE SETUP
EXIT
BLUETOOTH
AUDIO SETUP
AUDIO SETTINGS
DEVICE 2
HEADSET 1
UNPAIR ALL
PAIR
DEVICE 2
HEADSET 1
UNPAIR ALL
SEARCHING
DEVICE 2
HEADSET 1
UNPAIR ALL
MY PHONE
