MAINTENANCE
177
Minimum Recommended Tread
Depth
Warning
Riding with excessively worn tires is
hazardous and will adversely affect
traction, stability and handling which
may lead to loss of control and an
accident.
When tubeless tires, used without a
tube, become punctured, leakage is
often very slow. Always inspect tires
very closely for punctures. Check the
tires for cuts, embedded nails or other
sharp objects. Riding with punctured
or damaged tires will adversely affect
motorcycle stability and handling
which may lead to loss of control or an
accident.
Check
the
rims
for
dents
or
deformation. Riding with damaged or
defective wheels or tires is dangerous
and may lead to loss of control and an
accident.
Always
consult
your
authorized
Triumph dealer for tire replacement, or
for a safety inspection of the tires.
In
accordance
with
the
periodic
maintenance chart, measure the depth
of the tread with a depth gage, and
replace any tire that has worn to, or
beyond the minimum allowable tread
depth specified in the table below:
Under 80
mph
(130
km/h)
0.08 in (2 mm)
Over 80
mph
(130
km/h)
Front 0.08
in (2
mm)
Rear 0.12
in (3
mm)
Tire Replacement
All Triumph motorcycles are carefully
and extensively tested in a range of
riding conditions to make sure that the
most effective tire combinations are
approved for use on each model. It is
essential that approved tires and inner
tubes (if installed) mounted in approved
combinations,
are
used
when
purchasing replacement items. The use
of non-approved tires and inner tubes,
or approved tires and inner tubes in
non-approved combinations, may lead
to motorcycle instability, loss of control
and an accident.
A list of approved tires and inner tubes
specific to your motorcycle are available
from your authorized Triumph dealer, or
on the Internet at www.triumph.co.uk.
Always have tires and inner tubes
mounted
and
balanced
by
your
authorized Triumph dealer who has the
necessary training and skills to ensure
safe, effective installation.
When replacement tires or inner tubes
are required, consult your authorized
Triumph dealer who will arrange for the
tires and inner tubes to be selected, in a
correct combination, from the approved
list and mounted according to the tire
and
inner
tube
manufacturer's
instructions.
Initially, the new tires and inner tubes
will not produce the same handling
characteristics as the worn tires and
inner tubes and the rider must allow
adequate riding distance (approximately
100
miles
(160
km))
to
become
accustomed to the new handling
characteristics.
Summary of Contents for Street Triple R 2022
