Triumph My Triumph Connectivity Owner'S Handbook Manual Download Page 13

GoPro

13

GoPro

My GoPro does not appear in the search
list  when  trying  to  pair  to  the  My
Triumph Connectivity system

Make  sure  your  GoPro  is  on  and  in
“discoverable”  mode,  then  restart  the
searching  process  on  the  instruments.
Refer to the GoPro instructions for how
to 

make 

sure 

your 

device 

is

discoverable.

Note  that  your  GoPro  may  have  more
than  one  pairing/discoverable  mode.
Make sure it is set to the same mode as
used to connect to GoPro’s own app.

If using a new GoPro, make sure that it
has been connected to GoPro’s own app
at  least  once  before  attempting  to
connect to the My Triumph Connectivity
System.  This  allows  the  camera  to
connect  to  the  Triumph  system.  After
this  initial  connection  with  the  GoPro
app,  this  GoPro  app  is  no  longer
required  for  connection  to  the  My
Triumph Connectivity System.

When  pairing  a  GoPro,  the  instrument
shows a 'PAIRING SUCCESSFUL' message,
but  the  GoPro  remains  in  the  Pairing
menu

If  the  instrument  pack  displays  a
“pairing  successful”  message,  then
pairing is complete and you can exit the
pairing menu on the GoPro. Note that it
may take up to 15 seconds for the GoPro
information to appear in the GoPro tray
in  the  instrument  pack,  following
pairing.

I cannot turn my GoPro on using the My
Triumph Connectivity system

The  GoPro  camera  has  three  power
modes: Off, Standby, and On.

When  the  GoPro  is  connected  and  in
standby  mode,  the  instruments  will
show  “GoPro  –  Standby”  and  the  name
of  the  connected  GoPro.  To  wake  the
GoPro  from  standby  mode,  when  in  the
GoPro tray, press the joystick centre for
two  seconds  and  wait  up  to  15  seconds
for the device to connect. It is important
to  wait  for  this  action  to  complete,  as
pressing  any  other  buttons  during  this
process may result in a further delay to
the camera turning on.

The  GoPro  will  turn  off  completely
following 8 hours of inactivity. When the
GoPro is completely off, it is not possible
to  turn  it  back  on  via  the  My  Triumph
Connectivity System. Turn the GoPro on
manually before your ride to enable the
power control functionality.

I  cannot  pair  my  action  camera  from
another  brand  to  the  My  Triumph
Connectivity system

Only  GoPro  cameras  may  be  connected
to the My Triumph Connectivity System.
Cameras  made  by  other  manufacturers
are not supported.

Summary of Contents for My Triumph Connectivity


















Reviews: