Triumph Bonneville T100 2018, Owner'S Handbook Manual

Page: 87 / 186

How to Ride the Motorcycle
87
ABS Warning Light
When the ignition switch is
turned to the ON position, it is
normal that the ABS warning
light will flash on and off. The
light will continue to flash after engine
start-up until the motorcycle first
reaches a speed exceeding 6 mph
(10 km/h) when it will go off.
The warning light will not illuminate
again until the engine is restarted
unless there is a fault, or the ABS is
disabled by the rider.
If the ABS is disabled by the rider the
warning light will illuminate until the
ABS is enabled again.
If there is a fault with the ABS system
the warning light will be illuminated and
the general warning symbol will flash.
Warning
The ABS warning light will illuminate
when the rear wheel is driven at high
speed for more than 30 seconds when
the motorcycle is on a stand. This
reaction is normal.
When the ignition is switched off
and the motorcycle is restarted, the
warning light will illuminate until the
motorcycle reaches a speed exceeding
19 mph (30 km/h).
Warning
The ABS computer operates by
comparing the relative speed of the
front and rear wheels.
Use of non-recommended tires can
affect wheel speed and cause the ABS
function not to operate, potentially
leading to loss of control and an
accident in conditions where the ABS
would normally function.