Triumph Bonneville T100 2018, Owner'S Handbook Manual

Page: 78 / 186

General Information
78
Nuts, Bolts, Fasteners:
Visually
check that steering and suspension
components, axles, and all controls are
properly tightened or fastened. Inspect
all areas for loose/damaged fasteners.
Steering Action:
Smooth but not loose
from lock to lock. No binding of any of
the control cables (see page 124).
Brakes: Pull the brake lever and push
the brake pedal to check for correct
resistance. Investigate any lever/pedal
where the travel is excessive before
meeting resistance, or if either control
feels spongy in operation (see page 117).
Brake Pads:
Check that the correct
amount of friction material is remaining
on all the brake pads (see page 117).
Brake Fluid Levels: No brake fluid
leakage. Brake fluid levels must be
between the MAX and MIN marks on
both reservoirs (see page 118).
Front Forks:
Smooth action. No fork oil
leakage (see page 128).
Throttle:
Make sure that the throttle
grip returns to the idle position without
sticking (see page 110).
Clutch:
Smooth operation and correct
cable free play (see page 111).
Coolant: No coolant leakage. Check the
coolant level in the expansion tank
(when the engine is cold) (see page 107).
Electrical Equipment:
All lights and horn
function correctly (see page 58).
Engine Stop:
Engine start/stop switch
turns the engine OFF when the switch
is moved to the STOP position (see
page 56).
Stands: Returns to the fully up position
by spring tension. Return springs not
weak or damaged (see page 67).