Triumph Bonneville T100 2018, Owner'S Handbook Manual

Page: 49 / 186

General Information
49
In the event of an incomplete riding
mode change:
• Safely bring the motorcycle to a
stop.
• Select neutral gear.
• Turn the ignition OFF and then back
ON again.
• Select the required riding mode.
• Restart the engine and continue
riding.
Warning
Do not stop the engine using the
ignition switch or engine start/stop
switch while the motorcycle is moving.
Always bring the motorcycle to a stop
safely and engage neutral gear prior
to stopping the engine.
Stopping the engine by turning off the
ignition or engine start/stop switch
while the motorcycle is moving can
lock the rear wheel causing loss of
motorcycle control and an accident.
Caution
Do not stop the engine using the
ignition switch or engine start/stop
switch while the motorcycle is moving.
Stopping the engine by turning off
the ignition or engine start/stop
switch when the motorcycle is moving
may cause damage to motorcycle
components.
Traction Control (TC)
Warning
Traction control is not a substitute for
riding appropriately for the prevailing
road and weather conditions.
The traction control cannot prevent
loss of traction due to:
- Excessive speed when entering turns
- Accelerating at a sharp lean angle
- Braking
- Traction control cannot prevent the
front wheel from slipping.
Failure to observe any of the above
may result in loss of motorcycle
control and an accident.
Traction control helps to maintain
traction when accelerating on wet/
slippery road surfaces. If sensors detect
that the rear wheel is losing traction
(slipping), the traction control system
will engage and alter the engine power
until traction to the rear wheel has been
restored. The traction control warning
light will flash while it is engaged and
the rider may notice a change to the
sound of the engine.
Note
Traction control will not function if there
is a malfunction with the ABS system.
The warning lights for the ABS, traction
control and the MIL will be illuminated.
Note
Street Scrambler Only
Traction control is switched off when in
OFF ROAD mode.