7 of 12
Speed Triple S, Speed Triple R Models from
VIN 735337
1.
Fit the clamp assembly to the handlebars to
the left hand side of the handlebar riser.
Ensure no cables or wiring harness are trapped
between the clamp assembly and the
handlebars.
1. Handlebar risers
2. Clamp assembly
2.
Position the clamp 10 mm from the left hand
handlebar clamp, allowing sufficient clearance
to access the adjustment ring, as shown.
3.
Tighten the plastic nuts evenly until the clamp
assembly is secured to the handlebars. Do not
fully tighten the plastic nuts at this stage.
1. Handlebar clamp and riser
2. Clamp assembly
3. Adjustable mount
Tiger Sport
1.
Fit the clamp assembly to the handlebars to
the right hand side of the left hand mirror
clamp. Ensure no cables or wiring harness are
trapped between the clamp assembly and the
handlebars.
1. Clamp assembly
2. Mirror clamp, left hand side
2.
Position the clamp 35 mm from the left hand
mirror clamp, as shown.
Caution
A wiring harness which becomes trapped or
kinked during installation, or general motorcycle
operation, may result in wiring harness damage
and electrical malfunctions.
2
1
1
2
3
Warning
The phone holder kit must not be used if a GPS
mount is fitted to the motorcycle. If a phone
holder kit is used when a GPS mount is fitted it will
restrict handlebar movement which may result in
loss of motorcycle control and an accident.
Caution
A wiring harness which becomes trapped or
kinked during installation, or general motorcycle
operation, may result in wiring harness damage
and electrical malfunctions.
2
1
