4 of 12
Tiger Explorer XR, Tiger Explorer XR
X
,
Tiger Explorer XR
T
, Tiger Explorer XC,
Tiger Explorer XC
X
, Tiger Explorer XC
A
1.
Fit the clamp assembly to the handlebars
between the handlebar risers as shown. Ensure
no cables or wiring harnesses are trapped
between the clamp assembly and the
handlebars.
1. Clamp assembly
2. Handlebar
3. Handlebar risers
2.
Position the clamp assembly centrally between
the handlebar risers in the orientation shown
below.
3.
Tighten the plastic nuts evenly until the clamp
assembly is secured to the handlebars and
cannot rotate around the handlebars. Do not
fully tighten the plastic nuts at this stage.
1. Handlebar risers
2. Clamp assembly
3. Adjustable mount
Caution
A wiring harness which becomes trapped or
kinked during installation, or general motorcycle
operation, may result in wiring harness damage
and electrical malfunctions.
2
1
3
3
4
2
1
3
1
