Triumph A9510289 Fitting Instructions Manual Download Page 3

3 of 12

Note:

Triumph offers a broad range of approved
genuine accessories for your motorcycle. 
We cannot therefore cover all possible
equipment variations in these instructions. For
removal and installation of Triumph Genuine
Accessories, always refer to the instructions
supplied with the respective accessory kit. 
To obtain additional copies of any Triumph
accessory instructions, visit 
www.triumphinstructions.com or contact your
authorised Triumph dealer.

Installing the Clamp assembly

Note:

When installing the clamp assembly it should be
fitted directly on to the handlebars. Do not use
the rubber strip included in the kit.

1.

Collect the clamp assembly from the kit. Loosen
the plastic nuts sufficiently to allow the clamp
to be opened.

1. Clamp assembly
2. Plastic nut

Warning

The accessory kits covered in this instruction are
designed for use on specific models of Triumph
motorcycle. The accessory kits and the models
applicable are listed at the start of the instruction.
They should not be fitted to any other Triumph
model or to any other manufacturer’s motorcycle.
Fitting an accessory kit to a Triumph model not
listed, or to any other manufacturer’s motorcycle
will affect the performance, stability and handling
of the motorcycle. This may affect the rider’s
ability to control the motorcycle and could cause
an accident.

Warning

Always have Triumph approved parts, accessories
and conversions fitted by a trained technician of
an authorised Triumph dealer. The fitment of
parts, accessories and conversions by a technician
who is not of an authorised Triumph dealer may
affect the handling, stability or other aspects of
the motorcycle’s operation which may result in
loss of motorcycle control and an accident.

Warning

Throughout this operation, ensure that the
motorcycle is stabilised and adequately supported
to prevent risk of injury from the motorcycle
falling.

Danger

Do not use a mobile phone while you ride.

Do not text while you ride.

Do not attempt to adjust any GPS device while you
ride.

Telephone calls, texting or any attempt to use
your mobile device for any purpose will distract
you, this will cause accidents that can seriously
injure or kill riders, passengers, occupants in other
vehicles and pedestrians.

2

1

2

Summary of Contents for A9510289













Reviews: