STEP 9
Place Horizontal Tube
(#12)
over the lower / front sleeve of Ramp Chute
(#13)
and then attach it to the
Ramp U-Tube
(#11)
using Bolts
(#24)
and Lock Nuts
(#27)
as shown in
FIGURE 9
and
DETAIL D.
Use Wrench
(#31)
and Allen Wrench
(#36)
to tighten Bolts.
Tighten, but do not overtighten.
With the help of another adult, Attach the Backboard
(#21)
assembly to the Board L-Tubes
(#1)
using
Bolts
(#25)
, Washers
(#22)
and Lock Nuts
(#27)
as shown in
FIGURE 9
and
DETAIL E.
At the bottom hole of the backboard, bring the ramp up behind the Tube
(#12)
, attach the ramp tabs of
Ramp Chute
(#13)
using Bolts
(#25)
and Lock Nuts
(#27)
as shown in
FIGURE 9
and
DETAIL F.
Use Wrench
(#31)
and Allen Wrench
(#36)
to tighten Bolts.
Tighten, but do not overtighten.
1
FIGURE 9
DETAIL E
DETAIL D
DETAIL F
13
21
25
22
27
27
25
21
1
13
12
24
27
13
12
11
vu
Vv
mm
STEP 10
Connect the Sensor Wire of Mechanical Scoring Arms
(#15)
to Electronic Scorer
(#14)
as shown in
FIGURE 10.
Connect the Control Wire
(#37)
to Electronic Scorer
(#14)
as shown in
FIGURE 10
and
DETAIL G.
14
15
FIGURE 10
DETAIL G
Mechanical
Scoring Arm
Sensor
Mechanical
Scoring Arm
Sensor