6
REMOTE CONTROLLER
The remote controller requires two
“AAA”
batteries (included). Make sure the batteries are installed
properly before using the remote controller. Aim the remote controller at the infrared sensor of your
Video Conferencing System VC1 camera to remote control the unit.
Note: Please press the „VC1“button on the upper right side of your Remote Control in order
to control your Video Conferencing System VC1.
Name
Function
(1) Power
Press this button to power on/off the main
system.
(2) VC1
Press this button to control your Video
Conferencing System VC1.
(3) Info
Press this button to display the call
statistics information.
(4) Numeric Pad
Use to enter numeric numbers.
(5) Call
Start a call.
(6) Home
Bring up the main screen.
(7) Hang up
End the call.
(8) TB Point
Specified for some special functions. For
example, on the Phonebook configuration
screen of VC1 application, press this
button to create a new Group. (TB Point
to be developed)
(9) Preset
a. Press and hold for 3 sec. to set the
position of the camera to a preset from
0~9.
b. Press to move the camera to a selected
preset point number.
(10) Snapshot
Capture the image from the camera. To
view the captured image, press Present
button. (To be developed)
(11) Dual
Switch to dual screen mode. This splits the
video conferencing screen and present screen
onto two separate monitors (two monitors must
be connected to use the feature, one through
HDMI and one through VGA).
