Triumph Adler LP 4014, Instruction Handbook Manual

Page: 49 / 182

Printer Environment
1-37
1.5.9 Serial Interface Parameters
This setting is only available if you have the optional
Serial Interface
Board Kit (IB-10E) installed on your printer. You can change the baud rate,
data bits, stop bit, parity, and flow control for the serial interface. If these
settings are changed, you must also change the serial interface parameters
on your computer.
1
Click the MENU button on the start-up screen.
2
The Menu dialog box appears. Select and double click Interface
settings and Serial in that order. The serial interface items are
displayed on the screen.
3
Click the item you want to change, then select the value you want to
set from the pull-down menu.
Serial interface items
Interface settings
Serial
Bit per second