Triumph Adler FAX 950, Instruction Handbook Manual

Page: 41 / 155

3-3
6HFWLRQ
Making Copies
1
* To cancel the procedure part way through, press the STOP
key. The message display will revert to the initial mode.
1. Set the originals to be copied on the document table and, if
necessary, select the desired resolution and contrast.
2
2. Press the COPY/SPACE key 2 times.
* If the Optional Cassette is NOT installed, proceed to step 4.
Sort Copying
Carry out the following procedure to make multiple sets of copies
from a single set of originals.
* A maximum setting of “99” copy sets is possible.
* For more detailed information regarding the copy resolution,
contrast and magnification ratio, refer to “Standard Copying and
Group Copying”, page 3-2.
4
3
2
1
4
3
2
1
3
2
1
4
3
3
2
1
4
6(7 '2&80(17
2)6(76"
1
#
3
5 6 4
8 9 7
0
*
2
A A
3
3. If the Optional Cassette IS installed, use the cursor keys
(
씱
) (
씰
) to select which cassette copying will be
accomplished from. Select [1] for the cassette that is
included with the facsimile, or [2] for the Optional Cassette.
4
5
4. Use the keypad to enter the number of copy sets to be
made.
5. If you wish to change the magnification ratio, press the
ENTER FUNCTION key.
* If you do NOT wish to change the ratio from 100%,
proceed to step 7.
6
6. Use the keypad to enter the desired magnification ratio
(50% - 200%).
* When copying with the SUPER FINE setting, select a ratio
between 70% and 200%.
2)6(76"
$>@
2)6(76"
)2/,2>@
2)6(76"
2)6(76"
7
7. Press the START key. The originals will first be scanned into
memory and then copying will begin.
* Once copying is completed, remove the finished copies
from the paper eject table. A maximum of 100 copies can
be stacked at one time on the paper eject table.
#
5 6 4
8
9
7
0
*
A A