English
Chapter 5 - Advanced Operations
64
7.
Press the
Start
key and the display changes to SELECT
LOCATION.
8.
Select the location of the relay key station as follows:
9.
Press the
Start
key. Your fax machine will begin sending the fax.
Polling
When you normally send faxes, you load your document into your fax
machine, select a location and, if required, press the Start key to begin
sending the document. However, sometimes it is more useful to be able to
simply load your document into your fax machine and set it to wait for the
another fax machine to call and collect the document. This is called setting
your fax machine to be polled, or polling transmission. Calling another
fax machine to receive documents someone else has loaded into their fax
machine is called polling reception.
There are two standards for polling. Standard polling is to an old standard
that is used by many, but not all manufacturers and ITU selective polling,
which is the latest standard. Your fax machine supports both standards.
ITU selective polling allows you to retrieve documents from individual
mailboxes or ITU sub-addresses from a fax machine that meets the
standard for ITU selective polling.
Polling transmission
1.
Load the document for polling.
2.
Press the
Select Function
key.
3.
Press the
5/Polling
One Touch Key. The display shows BULLETIN
POLL.
4.
For standard one-time polling, press the
NO
X
key. If user function
17:MEM./FEEDER SW. has been set to
FEED
(see Programming),
your document remains on the document feeder and waits for it to
Select location using
Do this
A One Touch key
Press the One Touch key.
Auto Dial number
Press Auto Dial key, then enter the 3 digit Auto Dial code number on
the numeric keypad.
A number dialled on the
numeric keypad
Dial as you would on a normal telephone.
Summary of Contents for FAX 525
Page 1: ......
