Triumph Adler FAX 525 User Manual Download

Page: 121 / 129

English

Appendix B - ISDN G4 Option

113

Enter the ISDN(G4) ID and press the Start key.

Enter the ISDN SUB NUMBER and press the Start key.

Enter the ISDN CALLED NO. and press the Start key.

Term definitions

COUNTRY CODE:

This number is a terminal identifier (TID). Up to

three numbers (the country code of the country in which the machine is
being operated) can be registered.

ISDN(G4) NUMBER.:

This is the national subscriber number for the

ISDN. Up to 20 numbers can be used. This number is used as a TID and
for caller number information (CLIP) and checking MSN.

ISDN(G4) ID:

This number is a terminal identifier. Up to ten alphabetic

characters can be used.

ISDN SUB NUMBER.:

This is the sub-addressing number for directing

communications. Up to 19 numbers can be used.

ISDN CALLED NO.:

This is the called number for the ISDN-PBX. Up

to 20 numbers can be used. This number is used for caller number infor-
mation and checking MSN.

The

COUNTRY CODE

ISDN(G4) NUMBER

must be registered in the

fax machine. If these items are not registered in the fax machine, ISDN
service may be denied.

Other settings

ISDN dial mode (user setting 30)

Set to G3

- The call originates in the G3 mode when dialling is carried out

from the keypad. At the time, speech analogue transmission is requested
to the network.

Set to G4

(default setting)- The call originates in G4 mode when dialling

is carried out from the keypad. Non-restricted digital transmission is
requested to the network.

Summary of Contents for FAX 525


































































































































Search results

Summary of Contents for FAX 525

Reviews:

Related manuals for FAX 525

Brands by name

Popular brands

Triumph Adler FAX 525, User Manual

Search results

Summary of Contents for FAX 525

Reviews:

Related manuals for FAX 525

Brands by name

Popular brands