background image

Please read the instruction handbook before using the copier. Keep it close to the copier for easy

reference.

The sections of this handbook and parts of the copier marked with symbols are safety warnings meant to
protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the copier.
The symbols and their meanings are indicated below.

 DANGER: Indicates that serious injury or even death will very possibly result from insufficient attention to

or incorrect compliance with the related points.

 WARNING: Indicates that serious injury or even death may result from insufficient attention to or incorrect

compliance with the related points.

 CAUTION: Indicates that personal injury or mechanical damage may result from insufficient attention to

or incorrect compliance with the related points.

Symbols

The 

m

 symbol indicates that the related section includes safety warnings.  Specific points of attention are

indicated inside the symbol.

................... [General warning]

................... [Warning of danger of electrical shock]

................... [Warning of high temperature]

The 

 symbol indicates that the related section includes information on prohibited actions.  Specifics of the

prohibited action are indicated inside the symbol.

.................... [Warning of prohibited action]

.................... [Disassembly prohibited]

The 

 symbol indicates that the related section includes information on actions which must be performed.

Specifics of the required action are indicated inside the symbol.

.................... [Alert of required action]

.................... [Remove the power plug from the outlet]

.................... [Always connect the copier to an outlet with a ground connection]

Please contact your service representative to order a replacement if the safety warnings in the handbook are
illegible or if the handbook itself is missing. (fee required)

Summary of Contents for DC 2115











































Reviews: