Triumph Adler DC 2062, Instruction Handbook Manual

Page: 28 / 165

Section 4 BASIC OPERATION
4-2
(1) Basic copying procedure
1. Warm-up
Turn the main switch ON ( | ). At the end of warm-up, “READY TO
COPY.” will appear in the message display.
* If you set the originals that you want to copy and press the Start
key while the copier is still warming up, copying will begin as soon
as warm-up is finished.
* If you use job build functions (see page 6-3) or job reservation
functions (see page 6-1), scanning of the originals can begin while
the copier is still warming up.
2. Setting originals
Set the originals that you want to copy in the DF or on the platen.
(See page 3-4.)
4. Selecting the paper size
When “APS” is displayed, paper of the same size as the original will
be automatically selected. In order to copy the original onto a
different size of paper without changing the size of the image, touch
the paper size key that corresponds to the paper size that you want
to use, and then press the Manual key. To make copies at 100%
magnification (same size) onto paper of the same size as the
original, no special settings are required.
5. Copy exposure adjustment
In the initial mode, manual exposure mode is selected, the exposure
scale will be displayed and the copy exposure can be adjusted as
desired. When you want to darken the exposure, touch the
“DARKER” key to move the scroll box within the exposure scale to
the right. When you want to lighten the exposure, touch the
“LIGHTER” key to move the scroll box to the left.
* If copies are consistently too dark or too light, the overall exposure
level can be adjusted as well. (See “
5
Manual exposure adjust-
ment” on page 8-15.)
* The total number of exposure steps can be set to either 7 or 13.
(See “
2
Exposure steps” on page 8-15.)
7. Setting the number of copies
Use the numeric keys to enter the number of copies that you want to
make into the copy number display on the touch panel. You may
select up to 999 copies to be made at one time.
* It is possible to place a lower limit on the number of copies that can
be made at one time. (See “
@
Copy limit” on page 8-16.)
8. Start copying
Press the Start key. Copying is possible anytime
“READY TO COPY.” is shown in the message display and the Start
indicator is lit green.
2 1
4 5
-1
8 7
2A080030A
KM-6230 (KME)
/ 131
4-1