Triumph Adler DC 2062, Instruction Handbook Manual

Page: 135 / 165

Section 9 OPTIONAL EQUIPMENT
2A080030A
KM-6230 (KME)
/ 131
5. Pull out the staple holder.
6. Remove the empty staple cartridge from the staple holder.
7. Hold the staple holder in one hand and the new staple cartridge in the other and insert
the new staple cartridge making sure the direction of insertion is correct.
* The arrow on the staple cartridge indicates the correct direction of insertion.
8. Make sure the new staple cartridge is completely inserted all the way into the staple
holder and then remove the paper tape covering the staple cartridge.
9. Replace the staple holder back in its original position in the Stapling Unit. Once it has
been fully inserted, it will click into place.
10. Lift up the Stapling Unit slightly and then lower it into its original position.
9-7