Triumph Adler 3060i, User Manual

Page: 96 / 526

2-40
Installing and Setting up the Machine > Embedded Web Server RX
Accessing Embedded Web Server RX
1
Display the screen.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Examples: https://192.168.48.21/ (for IP address)
https://MFP001 (if the host name is "MFP001")
The web page displays basic information about the machine and Embedded Web Server RX
as well as their current status.
2
Configure the function.
Select a category from the navigation bar on the left of the screen. When you log in to the
machine as an administrator, you will see [
Device Settings ], [ Function Settings ],
[ Network Settings ], [ Security Settings ], and [ Management Settings ].
NOTE
If the screen “There is a problem with this website's security certificate.” is displayed,
configure the certificate. For details on Certificates, refer to the
Embedded Web Server RX
User Guide .
You can also continue the operation without configuring the certificate.