Triton WALLY-OK7Q, User Manual

Page: 20 / 28

XM894-V1.0-NR 19
“ Personality ” is displayed. Press ENTER, the display will show “ Personality ” .
2
．
Press <Up/Down>, the display will show
“
Temperature C/F
”
.
3
．
Press< ENTER>, the display will show “ Temperature C/F ” .
4
．
The display show
“
Celsius
”
,Press <Up/Down>, the display will show “Fahrenheit”.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.3.6 Initial Status
With this function, Display initial effect position.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
“
Personality
”
is displayed. Press ENTER, the display will show
“
Personality
”
.
2
．
Press <Up/Down>, the display will show “ Initial Status ” .
3
．
Press< ENTER>, the display will show
“
Initial Status
”
.
4
．
The display show “ XXX ” .
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.3.7 Reset Default
With this function, you can select restore factory set for ON or OFF, the default is OFF.
1
．
Tap <MODE/ESC>button ， access the main menu ， Tap the <Up/Down>button until
“ Personality ” is displayed. Press ENTER, the display will show “ Personality ” .
2
．
Press <Up/Down>, the display will show “ Reset Default ” .
3
．
Press< ENTER>, the display will show
“
Reset Default
”
.
4
．
The display show “ OFF ” ,Press <Up/Down>, the display will show “ON”.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.4 Reset Function
With this function you can reset the device via the Control Board. You can select the different
reset functions by turning the encoder.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
“
Reset Function
”
is displayed. Press ENTER, the display will show
“
Reset Function
”
.
2
．
The display show
“
Reset Pan&Tilt
”
, Press <Up/Down>, the display will show
“
Reset Pan&Tilt
”
.
3
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.5 Effect Adjust
8.5.1 Test channel
With this function you can test each channel on its (correct) function.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
“
Effect Adjust
”
is displayed. Press ENTER, the display will show
“
Effect Adjust
”
.
2
．
Press <Up/Down>, the display will show “ Test Channel ” .
3
．
Press< ENTER>, the display will show “ Test Channel ” .
4
．
The display show
“
AUTO Moving
”
frist channel, Press <Up/Down>, can choose
other channel.