XM894-V1.0-NR
12
Edit Program
Program 1
:
Program 10
Program Test
Step 01=SCxxx
Step 64=SCxxx
Testing program
Program in loop
Save and exit
Edit Scenes
Edit Scene 001
~ Edit Scene 83
Pan,Tilt,……
--Fade Time--
--Secne Time--
Input By Out
Save and automatically
return
manual scenes edit
Rec Controler
XX~XX
Automat. scenes rec
Default settings shaded
8.1 FUNCTION
8.1.1 Set DMX Address
With this function, you can adjust the desired DMX-address via the Control Board.
1.
Access the main menu.
2.
Tap the <Up/Down>button until
“
Set DMX Address
”
is displayed.
3.
Press ENTER, the display will show
“
Set DMX Address
”
.
4.
Tap the <Up/Down>button
，
the display will show “A001~AXXX”
5.
Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
8.1.2 Dmx Value
With this function you can display the DMX 512 value of each channel. The display
automatically shows the channel with a value changing.
1.
Access the main menu.
2.
Tap the <Up/Down>button until
“
Dmx Value
”
is displayed.
3.
Press ENTER, the display will show
“
Dmx Value
”
.
4.
Tap the <Up/Down>button
，
choose each channel.
5.
Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
8.1.3 Slave Mode
With this function, you can define the device as slave.
1.
Access the main menu.
2.
Tap the <Up/Down>button until
“
Slave Mode
”
is displayed.
3.
Press ENTER, the display will show
“
Slave Mode
”
.
4.
Tap the <Up/Down>button
，
the display will show “Slave1”, ”Slave2”, ”Slave3”.
5.
Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
8.1.4 Auto Program
With this function, you can run the internal program. You can select the desired program under
“Select program”
. You can set the number of steps under
“Edit program”
. You can edit the
individual scenes under
“Edit scenes”
. With this function, you can run the individual scenes
either automatically, i.e. with the adjusted Step-Time.
1.
Access the main menu.
2.
Tap the <Up/Down>button until
“
Auto Program
”
is displayed.
3.
Press ENTER, the display will show
“
Auto Program
”
.
4.
Tap the <Up/Down>button
，
the display will show “Master1”, ” Alone”.
5.
Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
