TRITON RiskVision Setup Guide
17
Initial Setup
Verify the RiskVision services
You can monitor the status of the local RiskVision services on the
System > Services
page in the Local Manager.
The Service Manager table should show a status of
Running
for all services.
If a single service is stopped, use the icon in the
Service Restart
column of the
table to restart that service.
If multiple services are stopped, or if you have changed the IP address or
hostname of your RiskVision appliance, use the
Restart All Services
icon above
the table to restart all RiskVision services.
When you use the Restart All option, you are automatically logged out of the
Local Manager. Give the Local Manager services about a minute to finish
restarting before you attempt to log in again.
Important
If the service that is stopped is
Local Analysis
, the
problem may be that the analytics databases have not
finished downloading.
Check download status on the
System > Analytics
page,
and restart the service or services when the databases have
finished downloading.