background image

Inclusive Bar Mixer Shower

17

The following can be carried out by a competent person

FAULT FINDING

1

 

Water too hot. 
 

 

 

 

 
 

 

 
 

2

 

Water too cold. 
 

 

 

 

 
 
 

 

High water flow 
and/or poor 
performance on a 
mains fed system.

1.1

 Temperature 

control incorrectly 
commissioned.

1.2

  Not enough cold 

water flowing through 
shower.

1.3

  Increase in the 

ambient cold water 
temperature.

1.4

  Cold water supply 

blocked. 

1.5

  High volume of cold 

water drawn off 
elsewhere.

2.1

  Temperature control 

incorrectly 
commissioned.

2.2

 

Not enough hot water 
flowing through 
shower.

2.3

  Decrease in the 

ambient cold water 
temperature.

2.4

  Insufficient hot water 

supplies from the 
heating system. 

2.5

  Hot water supply 

blocked or restricted. 

2.6

  Flow regulator not 

fitted (HP systems 
only).

3.1

  Flow regulators not 

fitted.

1.1.1

 Refer to the Commissioning section. 

 

1.2.1

 Reposition temperature control knob 

 

1.3.1

 Reposition temperature control knob. 

 

1.4.1

 Turn off the shower and consult a 

competent plumber or contact  
Customer Experience.

1.5.1

 

Reduce the simultaneous demand from  
the supply. 

2.1.1

 Refer to the Commissioning section. 

 

2.2.1

 Reposition temperature control knob

 

2.3.1

 Reposition temperature control knob

2.4.1

 Make sure heating appliance is set to 

maximum or has sufficient stored hot water.

2.4.2

 

Make sure heating appliance is igniting by 
trying a hot water tap elsewhere.

2.5.1

 Turn off shower and consult a competent 

plumber or contact Customer Experience. 

2.6.1

 

Fit the supplied flow regulator 

(Page 11)

.

3.1.1

 

Fit the supplieed flow regulator 

(Page 11)

.

Problem Cause 

Action

Summary of Contents for ASTI LEVER

























Reviews: