Inclusive Bar Mixer Shower
9
MAKING GOOD
Make good the wall and complete the tiling.
NOTE:
It is advised to use a suitable sealer
around the variable connector where it enters
the wall to stop water ingress
(fig.9)
.
Screw the supplied cover trims onto the fittings
until tight to the wall
(fig.10)
.
FITTING THE SHOWER
IMPORTANT:
Make sure that all supply
pipework has been flushed through before
fitting the mixer.
Offer the shower up to the fittings.
Check that the sealing washers are in place.
Screw the unions onto the fittings.
Fit the mixer controls
(fig.11 & 12)
and carry
out the commissioning procedure.
Fig.10
Summary of Contents for ASTI LEVER
Page 21: ...Inclusive Bar Mixer Shower 19...
Page 22: ...Inclusive Bar Mixer Shower 20...
Page 23: ...Inclusive Bar Mixer Shower 21...
