22.
User Manual | 7R BEAM PRO Triton Blue | Rev. May.2015 | www.triton-blue.com
english
s
et
disPlay
Light support 2 language, rotation display, enter page as shown in Figure 9 to set parameter following:
»
LANGUAJE: Select display as simplified Chinese or English.
»
SCREEN SAVER: When panel is idle(these is no operation in 10 second), displayer will enter
saver status. When set as “mode 1” , saver status is close display, as “ mode 2” saver status will
display DMX address code (DMX MODE) or display LOGO (AUTO RUN or SOUND CTRL). As “OFF”,
keep light up displayer and show main menu.
»
SCREEN ROTATION: Rotate displayer.
»
TOUCH ENABLE: Disable or enable touch function, when disable, use encoder to operate light
and set parameter.
»
TOUCH ADJUST: Adjust touch function, normally, not enter this item.
t
est
l
ight
Enter the page as shown in Figure 10, light will into test mode, in this mode, the light does not receive the
data for DMX controller.
»
PAN: range for 0 to 255
»
TILT: range for 0 to 255
»
FOCUS: range for 0 to 255
»
COLOR: range for 0 to 255
»
GOBO: range for 0 to 255
»
PRISM: range for 0 to 255
»
FROST: range for 0 to 255
»
STROBE: range for 0 to 255
