Available User IDs
Use this chart to record
Access Codes
for each
User ID. User ID
#11
is factory-set to
Access Code
1-1-1-1-1, and should be reprogrammed
first.
11
(1-1-1-1-1)
12
13
14
15
21
22
23
24
25
31
32
33
34
35
41
42
43
44
45
51
52
53
54
55
A total of twenty-five (25) codes can be programmed.
Programming Instructions
6
MicroIQ Electronic Lock Programming Guide
Unlocking the Unit
Warning:
Three invalid attempts will cause the lock to block any
other attempts for 3 minutes.
To open the unit:
1.
Enter the 5-digit
Access Code.
If a valid 5-digit
Access Code
is entered, the green LED will light
up and the lock will unlock. Proceed to step 2.
If an invalid
Access Code
is entered, the red LED will flash 3
times.
2.
Rotate the knob clockwise to the unlocked position.
The lock will re-engage within 5 seconds if left in the locked
position.
3.
To relock, rotate the knob counter-clockwise to the locked
position.
