Programming Instructions
2
MicroIQ Electronic Lock Programming Guide
Lock Components and Features:
Programming Instructions
Pre-programmed Codes
Your keypad lock has come preprogrammed with two (2) codes:
Access Code
1-1-1-1-1 to allow access to the unit before you program
your own codes, and
Factory Code
1-2-3-4-5 to allow you to program
your own unique
Master Code
. This
Master Code does not
give you
access to the unit; it is for programming only.
It is important to write down the new 5-digit
Master Code
in a
safe place and do not share it with anyone. Please make note of
your
new
Master Code
here
before
you begin the programming
procedure.
Note:
Refer to page 1 where you recorded your
Master Code.
Do not
give your
Master Code
to
anyone
.
If the
Master Code
is
compromised, then the unit’s security is compromised.
Green
Proceed
LED
Red
Error
LED
Yellow
Low battery
LED
Knob
in locked
position
Location to
point the
key-fob
Battery
holder
with cover
Keypad
Program
button
Push thin
front edge
inward
Press
Here
R
