manualshive.com logo in svg

Tritech Seanet Series, Manual Supplement

Share
Download
Tritech Seanet Series Manual Supplement Download Page 6

Tritech International Ltd 

 

Seanet System- Sonar Aux MDL Gyro 

 

Issue 2 

TIL – Eng – Spec – 064 

Page 7 of 15 

 

Safety Statements 

 

Caution

! 

 

 

 

Technical Support 

 
 

Contact your local agent or Tritech International Ltd 

 

 

Mail 

Tritech International Ltd. 

Peregrine Road, 
Westhill Business Park, 
Westhill, Aberdeen, 
AB32 6JL, UK 

Tel+44 

(0)1224 

744111 

 

Fax ++44 

(0)1224 

741771 

Email [email protected] 

 

Web www.tritech.co.uk 

 

An out-of-hours emergency number is available by 

calling the above telephone number 

 

 
If you have cause to use our Technical Support service, please ensure that you have the following 
details at hand 

prior

 to calling: 

 

•

  System Serial Number (if applicable) 

•

 Fault 

Description 

•

  Any remedial action implemented 

 

Due to the expansion of equipment capabilities and the fact that new sub-modules are continually 
being introduced, this manual cannot detail every aspect of the operation. 
 
 
The name of the organisation which purchased this system is held on record at 

Tritech International 

Ltd

. Details of new software and hardware packages will be announced at regular intervals. 

Depending on the module, free upgrades will be offered in keeping with our policy of maintaining 
the highest levels of customer support. 
 

Tritech International Ltd

 can only undertake to provide software support for systems loaded with 

Operating System and Tritech Seanet software in accordance with the instructions given in the 
System Re-installation section of this manual. It is the customers responsibility to ensure the 
compatibility of any other package that they may choose to load unless with the prior consent of 

Tritech

.

Throughout the manual certain safety or operational related comments and 
requirements will be highlighted to the operator by indications identified by the 
adjacent symbol and text. 

Summary of Contents for Seanet Series















Reviews:

No comments

Brands by name

Popular brands

Load more brands