Operation
Altimeter Product Manual
0286-SOM-00001, Issue: 09
28
© Tritech International Ltd.
Note
If the
AuxComm 1 Sec Rate
check box is disabled, the sonar will try to send
all of its data and the data collected through the auxiliary port in one go. If the
quantity and rate of this data is too great then the interface may hang.
From the above dialog click on the
Baud rates
button and check that the rates on the
Async 1 (AUX)
match the device output (this is normally 9600 baud for altimeters).
Configuring the SeaKing Head
After the software has been configured the SeaKing head should be modified to allow correct
communication.
For the correct jumper settings refer to Appendix A,
Jumper Settings for SeaKing with
Important
In order to change the jumper settings it will be necessary to expose sensitive
electronics within the SeaKing head and so appropriate measures should be
taken to protect against the possibility of static discharge which may damage
the sonar head.
