find more information on
www.tristarbot.com
9
the nozzle diameter, here 0.4mm, normally make it two or three times unless you
make a single wall printing.
Infill
If you want to print toys or other non-mechanical items,10% to 20% will be
fine. If you want to make some mechanical components, 30% or more is better.
Printing temperature for PLA, about 190 to 220 is fine, and bed temperature
is around 60 to 80.
Print Speed
This printer is pretty stable, you can try 90mm/s, 80mm/s for PLA, or 70mm/s
and 60mm/s for better result, but if you print with high temperature filament,
such as ABS, PC, Nylon ect, you need to slow down the speed, and for small print,
maybe even to the minimum speed, 25mm/s.
Cooling
Always check the Enable Cooling Fans for PLA but never check it for high
temperature filament.
Support.
Check the enable support when there is possibility to collapse, otherwise do
not enable it.
Platform adhesion
This feature is used to avoid warping .If you print with PLA, Skirt will be fine,
